1
Thank you for choosing APEC drinking water systems.
You now own the finest water filter in America.
Please read and become familiar with instructions and parts needed before proceeding with
the installation.
BEFORE INSTALLATION:
Inspect the system:
Please take the system and all the components out of the box. Inspect the system and all the con-
nection fittings carefully, make sure nothing is damaged during shipping. If any part is cracked or
broken, please do not proceed with the installation and contact APEC or your distributor for an
exchange or diagnosis.
Recommended tools list:
• Variable speed drill
• Drill bit: 1/2” (for standard faucet hole, air-gap faucet requires 1&1/4” hole)
• 5/8”, 9/16” open-end wrench, or adjustable wrench, pliers
• Utility knife, or scissors
• Teflon tape
Operating Parameter
• Operating pressure: 20 psi minimum to 85psi maximum
• Feed water temperature: 40 – 100 degree F (4-37 degree C)
• Do not connect this unit to hot water source
• Install the unit in a sheltered environment, avoid exposure to hot and cold weather or under
direct sun light.
Copyright:
This manual is copyrighted by APEC Inc. Under the copyright laws, this manual may not be reproduced in any form, in
whole or part, without the prior written consent of APEC Inc.
General Installation/Operation/Maintenance Requirements
• Installation needs to comply with state and local laws and regulations.
• Do not use with water that is microbiologically unsafe or of unknown quality without ad-
equate disinfection before or after system. Systems certified for cyst reduction may be used
on disinfected water that may contain filterable cysts.
• This system contains a replaceable treatment component critical for effective reduction of
total dissolved solids. The product water shall be tested periodically to verify that system is
performing satisfactorily.
Commentaires sur ces manuels