APEC Water Systems ROES-50 Manuel d'instructions Page 1

ESSENCE REVERSE OSMOSIS SYSTEMINSTALLATION INSTRUCTION& OWNER’S MANUALAll Rights Reserved © APEC Water SystemsVer 1.9

7RiserTubeFor Flexible LineFaucetShankMain WaterSupply Shut-offValveRiserTubeFor Solid LineFaucetShankNeedleValveNeedleValveMain WaterSupply Shut-offV

8Test for leaks at this point: Close the Needle Valve (turn needle handle clockwise all the way in to close). Turn ON the cold water supply to the sin

9Step 2: Drain Saddle InstallationNote: To avoid possible drainage noise, mount drain line as low as possible on the vertical tailpiece, or on horiz

103. See Fig. 8, 8A. Make sure to align the drain saddle hole to the drilled hole perfectly. Mis-aligning these two holes will block the waste wat

113. For Porcelain Sink: Porcelain enameled sinks can readily be chipped if care is not exercised when drilling the hole. Before starting the drill m

122. Quick-Connect (QC) fitting (no insert, sleeve, or nut)Fig. 10A Fig. 10BStep 5: Positioning The System1. Main System: The main system can sta

13How to Connect: - See Fig.10A. Push the tubing into the Quick Connect fitting, then gently pull back on the tubing to make sure the connection was

14Details on Tubing Connections: To ensure a smooth and correct installation, please connect the water lines following the sequence and order outli

153. Point W - Waste water connection:Tubing color: Black tubing. Connect the BLACK tubing from the RO to the Drain Saddle.Fitting type: Plastic Comp

16Option: Ice-maker ConnectionIf you want to connect product water from the RO to your ice-maker, you will need: • One T-fitting, preferably the q

173. Wait for tank to fill: Before usage, allow the tank to fill. Tank normally takes 2-3 hours to fill. When the tank is filled, the RO will shut of

Please keep this Owner’s Manual for future reference. It contains useful information on how to maintain and care for your APEC Reverse Osmosis water f

1Thank you for choosing APEC reverse osmosis systems. You now own the finest water filter in America. Please read and become familiar with instruction

2Components included with the ROES system:Make sure you have all these parts before starting installation.1 RO system head with pre installed membran

31) Bracket2) Membrane and housing (4th-stage filter)3) In-line carbon filter (5th-stage filter)4) Sediment pre-filter and housing (1st-stage filt

4THERE ARE TWO PARTS TO INSTALLING THE RO SYSTEM: Assemble the filters and housings onto the main systemInstalling the systemThe RO Membrane Element h

5PART II. INSTALLING THE SYSTEMSpace: Make sure there is sufficient space under the counter for installation (an area of about 17”L x 6”W x 18”H f

6Fig. 4A - Needle Valve Installation.Attach the needle valve (C) to water supply adapter (A). Please apply 5-6 wraps of teflon tape to needle valve pr