APEC Water Systems ROES-50 Manuel d'instructions télécharger pdf (Page 10)

Riser

Tube

r Flexible Line

Faucet

Shank

Main Water

Supply

Shut-off

Valve

Riser

Tube

For Solid Line

Faucet

Shank

Needle

Valve

Needle

Valve

Main Wate

Supply

Shut-off

Valve

Sink

Fig. 5A Fig. 5B

3. Recommend Connection For Flex Line Riser: See Fig. 5A. & Fig. 5D Loosen nut and separate cold

water riser tube from shut off valve. Gently bend riser tube so that the Feed Water Adapter (Fig 4) fits

onto the shut off valve. If your riser tube has no built-in washer, then fit the cone-shaped washer pro-

vided onto the riser tube. Connect the riser tube, feed water adapter, and shut off valve together and

tighten.

For Solid Copper Riser: See Fig. 5B. Follow the same procedure as for flex line. If the copper riser

cannot bend, this it’s best to replace it with a flex line riser. Fit the feed water adaptor to the shut off valve

the same way as described above.

Option Connection Point: See Fig. 5E. The feed water adapter can also be installed between the riser

tube and faucet shank. Loosen nut and separate cold water riser tube from faucet shank. Gently bend

riser tube so that the Feed Water Adapter fits onto the faucet shank. If your riser tube has no built-in

washer, then fit the cone-shaped washer provided onto the riser tube. Connect the riser tube, feed water

adapter, and faucet shank together and tighten.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

APEC Water Systems ROES-50 Manuel d'instructions Page 10